Engineer Ply offers a wide range of high quality plywood, manufactured from the premium A+ grade timber. Our rigorous engineering process ensures the product is perfectly bonded and suitably treated to withstand termites, bores & moisture. Highly recommended for all types of furniture, wall panelling, partitions, ceilings, laminations & paint finish.
(IS: 1659 - 1989)
EngineerPly blockboards are made up of the kiln – seasoned and chemically treated European timber only. It has a smooth & warp-free surface, free from corrugation & gaps. Dimensionally stable, it resists termites & other wood destroying organisms. We offer two grades – (1) Interior Grade (MR - moisture resistant), often used for making indoor furniture, partition, panelling, ceiling , etc. (2) Exterior Grade (BWP - boiling water proof), considered to be suitable for outdoor use where there is a likely exposure to high humidity. Our blockboards can also be made available with any decorative surface as per the customer's choice.
|S.No.||Test Prescribed||Value for Conformity||Observed Value|
|01.||Moisture Content (%)||10 - 15 %||10 - 12|
|02.||Modules for Elasticity (N/mm2)||4000||5500|
|03.||Modules for Rupture (N/mm2)||40||50|
|04.||Water Absorption (%)||< 5||< 5|
|05.||Screw Holding Strength (kgs)||80||100|
|06.||Nail Holding Strength (kgs)||50||55|
|07.||Squareness Test (%)||< 0.2||< 0.1|
|08.||Edge Straightness Test (%)||< 0.2||< 0.1|
|09.||Water Resistance Test||No Delamination after 72 hours||Conforms|